📞 18925114654
🌐 EN

MENNEKES Product name :Connector PowerTOP Xtra R14638

4P IP69, IP67

Technical data

Model14638
Product nameConnector PowerTOP Xtra R with ErgoCONTACT
Specification4P IP69, IP67
BrandMENNEKES
Product categoryIndustrial connector
Unit

Specifications

Poles4p(4P)
Protection classIP69, IP67
Clock position7h
Product nameConnector PowerTOP Xtra R
ModelPart No. 14638
Rated current16A
时钟位置7h
Rated voltage AC500V
额定 Frequency50-60Hz
连接方式螺钉端子 - ErgoCONTACT
端子螺钉驱动PZ2, 槽
连接端子拧紧扭矩1.2 Nm
导体截面积1-2.5 mm²
Cable 弯折 Protection集成在 Cable 夹中
净重290g
包装单位10件
每托盘 Quantity1120件
Housing MaterialPA6 松鼠灰 [类似 RAL 7000]
前端 MaterialPA6 黑色 [类似 RAL 9005]
铰链盖 MaterialPA6 黑色 [类似 RAL 9005]
铰链TPE 黑色 [类似 RAL 9005]
夹篮PBT/PC 松鼠灰 [类似 RAL 7000], TPE 安特拉灰 [类似 RAL 7016]
环境温度-25°C 至 +40°C
认证VDE, CE
符合标准DIN EN IEC 60309-2
EAN4015394308836

Pole convention :4P = 4P(2P+地=3P, 3P+地=4P, 3P+N+地=5P,都把接地算进去)。See the pole table →

Need a quotation?Industrial prices vary with quantity and lead time — we quote against your actual requirement. Fill in the form or call18925114654, An engineer will reply within one business hour.

Selection tips

  • Confirm the current rating: 16A / 32A / 63A / 125A must match the equipment rating, and plug and socket must share the same rating.
  • Confirm the IP rating: IP44 for dry indoor areas; IP67 outdoors, in wet areas and where wash-down happens.
  • Confirm the pole count: 3P+N+E (5-pole) for three-phase equipment, 2P+E (3-pole) for single-phase.
  • Mounting method: Wall-mounted, flush, panel-mounted or portable — it must suit the existing enclosure or equipment.

Not sure? Read the selection guide, or let our engineers specify it。

Matching products (identical current / voltage / poles / IP rating — mates directly)

This model is a connector (portable female). It mates only with same-specification plugs and appliance inlets.
This model:4P IP69, IP67 (matching models are also IP69)
There is currently no matching model with the same specification (4P IP69, IP67) in stock. For a complete set (plug + socket + connector), ask our engineers to specify it or call 18925114654.

Mating rule: plug ⇄ socket / connector; connector ⇄ plug / appliance inlet; socket ⇄ plug. Current, voltage, poles and IP rating must all be identical for the pair to mate.