📞 18925114654
🌐 EN

MENNEKES Product name :Connector PowerTOP3907

5P IP67

MENNEKES Product name :Connector PowerTOP 3907(5P IP67) product photo

Technical data

Model3907
Product nameConnector PowerTOP
Specification5P IP67
BrandMENNEKES
Product categoryIndustrial connector
Unit

Specifications

Poles5p(5P)
Protection classIP67
Clock position6h
Product nameConnector PowerTOP
ModelPart No. 3907
Rated current32A
时钟位置6h
Rated voltage AC400V
额定 Frequency50-60Hz
连接方式螺钉端子
端子螺钉驱动PZ2, 槽
导体截面积2.5-6 mm²
Cable 弯折 Protection集成在 Cable 夹中
净重476g
包装单位10件
Housing MaterialPA6 红色 [类似 RAL 3013]
铰链盖 MaterialPA6 红色 / TPE 黑色 / PBT/PC 松鼠灰 [类似 RAL 7000]
环境温度-25°C 至 +40°C
认证VDE, EAC, CQC
符合标准DIN EN IEC 60309-2
EAN4015394099840

Pole convention :5P = 5P(2P+地=3P, 3P+地=4P, 3P+N+地=5P,都把接地算进去)。See the pole table →

Need a quotation?Industrial prices vary with quantity and lead time — we quote against your actual requirement. Fill in the form or call18925114654, An engineer will reply within one business hour.

Selection tips

  • Confirm the current rating: 16A / 32A / 63A / 125A must match the equipment rating, and plug and socket must share the same rating.
  • Confirm the IP rating: IP44 for dry indoor areas; IP67 outdoors, in wet areas and where wash-down happens.
  • Confirm the pole count: 3P+N+E (5-pole) for three-phase equipment, 2P+E (3-pole) for single-phase.
  • Mounting method: Wall-mounted, flush, panel-mounted or portable — it must suit the existing enclosure or equipment.

Not sure? Read the selection guide, or let our engineers specify it。

Matching products (identical current / voltage / poles / IP rating — mates directly)

This model is a connector (portable female). It mates only with same-specification plugs and appliance inlets.
This model:5P IP67 (matching models are also IP67)
There is currently no matching model with the same specification (5P IP67) in stock. For a complete set (plug + socket + connector), ask our engineers to specify it or call 18925114654.

Mating rule: plug ⇄ socket / connector; connector ⇄ plug / appliance inlet; socket ⇄ plug. Current, voltage, poles and IP rating must all be identical for the pair to mate.