📞 18925114654
🌐 EN
中文English
Home › Industry solutions › Shipyards and ports: salt air, open weather, welding and high current

Shipyards and ports: salt air, open weather, welding and high current

Shipyards and ports combine aggressive corrosion, open-air exposure, weld spatter and high current. How to choose IP rating and materials, and what welding areas need.

Shipyards, quays and port machinery combine salt air, rain, weld spatter, high current and portable work. Together they are a stress test for any connector.

Four selection points

  1. IP67 as the baseline, IP69 in wash-down areas; open port sites also need UV and salt-ageing resistance.
  2. Nickel-plated contacts resist oxidation better — the classic MENNEKES contact sleeve uses high-conductivity brass with nickel plating (see contact sleeve technology).
  3. Weld spatter: droplets stick to the mating face and degrade contact, so use covered models and clean after work.
  4. Rubber housings for portable work: knocks and dragging are normal.
UseModels
Open-air / wash-down sockets5604407G (32A IP67/IP69 DUO) · 13642 (IP67/IP69 plug)
Portable / temporary power70033, 70351 (EverGUM rubber combinations)
High current (shore power / welders)75091 (250A) · 75221 (200A wall-mounted socket)
Reference: the MENNEKES shipyard solution.

Related: reefer container sockets (3h) · IP44 vs IP67

Port and shipyard projects: send the working area, equipment and current and we supply the complete set including cable glands. Contact our engineers

Need a quote or selection advice?

Send us the model or site parameters — our engineers verify the specs and lead time, then quote.

Enquire now Call us

Continue reading

How to choose industrial plugs and sockets: 5 steps to the right model
Current, poles, IP rating, mounting and brand — follow these five steps and you pick the right industrial plug or socket the first time, without trial and error.
IP44 vs IP67: what the two numbers really mean
The difference is not just a bit more water resistance. What IEC 60529 actually specifies, and how to choose for outdoor and wet areas.
Reading MENNEKES model numbers: 32xx / 27xxx / 13xA
How MENNEKES numbers its industrial plugs, sockets and connectors, and how to recognise a model at a glance.
Reading the MENNEKES 93xx series: 9322 / 9342 / 9372 / 9382 compared
93xx is the MENNEKES wall-mounted IP67 industrial socket series. The last digit gives the voltage, the third digit the poles and current. The full 9300–9382 table and the four comparisons people ask about most.
Can MENNEKES sockets be interchanged with other CEE brands? Check the clock position first
Interchangeability is not about the brand but four things: current, poles, clock position and IP rating. With the clock positions we verified against our own stock (110V = 4h, 230V single-phase = 6h, 400V 3-pole = 9h, 400V 4/5-pole = 6h, 500V = 7h).
Counting poles on industrial plugs and sockets: 3P / 4P / 5P explained
One model is written 3P on one page and "3-pole" on another — it is the same number, and the earth is always counted. With a table checked against the manufacturer datasheets (voltage and clock position included).
What people call industrial sockets: add-on = panel-mounted = flush-mounted
The same product has several names: add-on socket, panel-mounted socket and flush-mounted socket are the same thing, while wall-mounted is a different one. A full glossary so you quote the right model.
16A / 32A / 63A / 125A: how to pick the rating in three steps
The rating follows the equipment current with at least 20% headroom: 16A ≈ 7.5kW, 32A ≈ 15kW, 63A ≈ 30kW, 125A ≈ 60kW (three-phase 380V). With the conversion formulas and the four commonest mistakes.